Arduıno Nano da hata

Katılım
14 Ara 2011
Mesajlar
47
Puanları
1
Merhaba
Nano ya program yükleyemiyorum.
Birçok yöntem denedim yine olmadı bu sorunu çözen varsa yardımcı olabilir mi?
atmega328p(old bootlodear)
com bağlantısında sorun yok
reset tuşuna basılı tutup yükleme

Hata Kodu

Çalışmanız programın 444 bayt (1 %) saklama alanını kullandı. Maksimum 30720 bayt.
Global değişkenler belleğin 9 byte kadarını (0%) kullanıyor. Yerel değişkenler için 2039 byte yer kalıyor. En fazla 2048 byte kullanılabilir.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x6f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x6f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x6f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x6f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x6f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x6f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x6f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x6f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x6f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x6f
Karta yüklenirken sorun oluştu. Tavsiyeler için http://www.arduino.cc/en/Guide/Troubleshooting#upload adresine göz atabilirsiniz.
 
Bazen bilgisayarı yeniden başlatmak gerekiyor
Resete neden basıyorsun
 
*Nano daki bootloader silinmiş/bozuk olabilir.
*Yazılım attığınız esnada RX pinine başka bir bağlantı olmamalı.
Bu iki sebepten dolayı aynı hatayı almıştım daha önce.
icsp ile programlayıcı kullanmanızı da tavsiye ederim.
 

Forum istatistikleri

Konular
127,957
Mesajlar
913,907
Kullanıcılar
449,606
Son üye
rasit.

Yeni konular

Geri
Üst