IEC Standartları İngilizce

elektronikmuh

Yönetici
Yönetici
Yönetici
Katılım
13 Ocak 2007
Mesajlar
2,227
Puanları
1,866
Yaş
46
https://www.dropbox.com/sh/teejjloh8xjdcsc/4yhOY2GD4B
Normas Paylaşım Klasörü

Kod:
1. ANSI C37.42-1996 American National Standard Specification for High-Voltage Expulsion Type Distribution Class Fuses%2C Cutouts%2C Fuse Disconnecting Switches and Fuse Links.

2. ANSI_IEEE C67.92-1987 --- IEEE Guide For The Application Of Neutral Grounding In Electrical Utility Systems Part I-introduction.

3. ANSI_IEEE Std 432-1976 --- IEEE guide for insulation maintenance for rotating electrical machinery (5 hp to less than 10 000 hp).

4. ANSI_IEEE Std 665-1995 --- IEEE guide for generating station grounding.

5. ANSI-IEEE Std 125-1988 --- IEEE recommended practice for preparation of equipment specifications for speed-governing of hydraulic turbines intended to drive electric generators.

6. ANSI--IEEE Std 576-1989 IEEE recommended practice for installation, termination, and testing of insulated power cable as used in the petroleum and chemical industry.

7. ANSI--IEEE Std C37.97-1979 --- IEEE Guide for Protective Relay Applications to Power System Buses.

8. ANSI--IEEE Std C57.12.56-1986 --- IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type Power and Distribution Transformers.

9. IEEE Std 18-2002 --- IEEE Standard for Shunt Power Capacitors.

10. IEEE Std 80-2000 - IEEE guide for safety in AC substation grounding.

11. IEEE Std 142-2007 --- IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems.

12. IEEE Std 260.1-2004 --- IEEE Standard Letter Symbols for Units of Measurement

13. IEEE Std 519-1992 --- IEEE recommended practices and requirements for harmonic control in electrical power systems.

14. IEEE Std 929-2000 --- IEEE recommended practice for utility interface of photovoltaic (PV) systems.

15. IEEE Std 937-2000 --- IEEE recommended practice for installation and maintenance of lead-acid batteries for photovoltaic.

16. IEEE Std 937-2007 --- IEEE Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic %28PV%29 Systems.

17. IEEE Std 943-1986 (1992) --- IEEE Guide for Aging Mechanisms and Diagnostic Procedures in Evaluating Electrical Insulation Systems.

18. IEEE Std 946-1992 --- IEEE recommended practice for the design of DC auxiliary power systems for generating stations.

19. IEEE Std 946-2005 --- IEEE recommended practice for the design of DC auxiliary power systems for generating stations.

20. IEEE Std 958-2003 --- IEEE Guide for the Application of AC Adjustable-Speed Drives on 2400 to 13 800 V Auxiliary Systems in Electric Power Generating Stations.

21. IEEE Std 1010-2006 --- IEEE Guide for Control of Hydroelectric Power Plants.

22. IEEE Std 1050-1996 --- IEEE Guide for Instrumentation and Control Grounding in Generating Stations.

23. IEEE Std 1100-1992 --- IEEE recommended practice for powering and grounding sensitive electronic equipment.

24. IEEE Std 1100 - 2005 --- IEEE Recommended Practice for Powering and Grounding Electronic Equipment.

25. IEEE Std 1120 - 2004 --- IEEE Guide for the Planning, Design, Installation, and Repair of Submarine Power Cable Systems.

26. IEEE Std 1125-1993 --- IEEE guide for moisture measurement and control in SF6 Gas-Insulated Equipment.

27. IEEE Std 1138-1994 --- IEEE Standard Construction of Composite Fiber Optic Overhead Ground Wire - OPGW - for Use on Electric Utility Power Lines.

28. IEEE Std 1142-1995 --- IEEE Guide for the Design, Testing, and Application of Moisture-Impervious, Solid Dielectric, 5-35 kV Power Cable Using Metal-Plastic Laminates.

29. IEEE Std 1143-1994 IEEE guide on shielding practice for low voltage cables.

30. IEEE Std 1159-1995 --- IEEE Recommended Practice for Monitoring Electric Power Quality.

31. IEEE Std 1159.3-2003 --- IEEE Recommended Practice for the Transfer of Power Quality Data.

32. IEEE Std 1184-2006 --- IEEE Guide for Batteries for Uninterruptible Power Supply Systems.

33. IEEE Std 1247™-2005 --- IEEE Standard for Interrupter Switches for Alternating Current, Rated Above 1000 Volts.

34. IEEE Std 1248-1998 --- IEEE guide for the commissioning of electrical systems inhydroelectric power plants.

35. IEEE Std 1248-1998 IEEE guide for the commissioning of electrical systems in hydroelectric power plants.

36. IEEE Std 1283-2004 --- IEEE Guide for Determining the Effects of High-Temperature Operation on Conductors%2C Connectors%2C and Accessories.

37. IEEE Std 1300-1996 IEEE guide for cable connections for gas-insulated substations.

38. IEEE Std 1349-2001--- IEEE Guide for the Application of Electric Motors in Class I, Division 2 Hazardous (Classified) Locations.

39. IEEE Std 1366-2003 --- IEEE Guide for Electric Power Distribution Reliability Indices.

40. IEEE Std 1366- 2001 --- IEEE guide for electric power distribution reliability indices.

41. IEEE Std 1410-2004 --- IEEE guide for improving the lightning performance of electric power overhead distribution lines.

42. IEEE Std 1513-2001--- IEEE Recommended Practice for Qualification of Concentrator.

43. IEEE Std C37-91-2000 --- IEEE guide for protective relay applications to power transformers.

44. IEEE Std C37.1-1994 --- IEEE Standard Definition, Specification, and Analysis of Systems Used for Supervisory Control, Data Acquisition, and Automatic Control.

45. IEEE Std C37.2-1991 --- IEEE standard electrical power system device function numbers.

46. IEEE Std C37.011-1994 --- IEEE Application Guide for Transient Recovery Voltage for AC High- Voltage Circuit Breakers Rated on a Symmetrical Current Basis.

47. IEEE Std C37.13-1990 (1995) --- IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures.

48. IEEE Std C37.013-1997 --- IEEE Standard for AC High-Voltage Generator Circuit Breaker Rated on a Symmetrical Current Basis.

49. IEEE Std C37.14-1992 --- IEEE Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures.

50. IEEE Std C37.20.1-1993 --- IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear.

51. IEEE Std C37.20.2-1993 --- IEEE Standard for Metal-Clad and Station-Type Cubicle Switchgear.

52. IEEE Std C37.21™-2005 --- IEEE Standard for Control Switchboards.

53. IEEE Std C37.90™-2005 --- IEEE Standard for Relays and Relay system Associated with electric Power Apparatus.

54. IEEE Std C37.96-2000 --- IEEE Guide for AC Motor Protection.

56. IEEE Std C37.99-2000 --- IEEE guide for the protection of shunt capacitor banks.

57. IEEE Std C37.113-1999 --- IEEE guide for protective relay applications to transmission lines.

58. IEEE Std C57.12.00-1993 IEEE Standard General Requirements for Liquid-Immersed Distribution.

59. IEEE Std C57.12.01-1989 --- IEEE standard general requirements for dry-type distribution and power transformers including those.

60. IEEE Std C57.12.90-1993 --- Liquid-Immersed Distribution, Power, and Regulating Transformers and Guide for Short-Circuit Testing.

61. IEEE Std C57.12.91-1995 --- IEEE Test Code for Dry-Type Distribution and Power Transformers.

62. IEEE Std C57.92-1981 --- IEEE Guide for Loading Mineral-Oil-Immersed Power Transformers up to and Including 100 MVA with 55 C or 65 C Average Winding Rise.

63. IEEE Std C57.94-1982 --- IEEE recommended practice for installation, application, operation and maintenance of dry-type general purpose distribution and power transformers.

64. IEEE Std C57.98-1993 --- IEEE Guide for Transformer Impulse Tests.

65. IEEE Std C57.106-1991 --- IEEE guide for acceptance and maintenance of insulating oil in equipment.

66. IEEE Std C62.11™-2005 --- IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits %28over 1 kV%29.

67. IEEE Std C62.64 TM -1997 --- IEEE Standard Specifications for Surge Protectors Used in Low-Voltage Data, Communications and Signaling.

IEEE guide for the application of neutral grounding in electrical utility systems.

68. IEEE Std C62.92.1-2000 --- Part I --- introduction.

69. IEEE Std C62.92-1989 --- Part II - grounding of synchronous generator systems.

70. IEEE Std C62.92.3-1993 --- Part III-Generator Auxiliary Sys

71. IEEE Std C62.92.4-1991 --- part IV - distribution

72. IEEE Std C62.92.5-1992 --- part V - transmission systems and subtransmission systems
 
İyi bir topraklama değeri sıfıra ohm'a yakın olan değerdir. Fakat her işte olduğu topraklamadada maliyetler önemli, onun için iyi bir topraklama değeri izin verilen değerler içinde olandır.
Otomatik sigorta bulunduğu devreyi yüksek akım ve kısa devre akımlarından koruyan bir anahtarlama elamanıdır.

Forum istatistikleri

Konular
127,950
Mesajlar
913,850
Kullanıcılar
449,597
Son üye
CTure

Yeni konular

Geri
Üst