4x4x4 LED Cube

Step 1: What You Will Need:






Parts/ Materials:

1. 64 Diffused LEDs $2.00
2. 4 100 OHM Resistors $1.00
3. Pin Header $0.50
4. Slide Switch $1.00
5. Wire $0.75
6. Craft Wire $0.25
7. Perf Board $2.00
8. Project Box $6.00
9. 9V Power Supply $1.00

Total Cost: $14.50

Tools/ Adhesives:

• Arduino Uno
• Drill
• 1/16" Drill Bit
• 5/16" Drill Bit
• Knife
• Straight Edge
• Needle Nose Pliers
• Soldering Iron
• Solder
• Hot Glue Gun

First, Start by printing out my 4x4x4 LED Cube Template and paste it to a cardboard box.Make sure that the printing settings are set to actual size and landscape orientation. Next, punch out all 16 LED holes(grey dashed circles) using a pencil. Insert a LED into the individual holes to test the fit.

4x4x4 LED Cube Template.pdf


http://www.instructables.com/id/4x4x4-LED-Cube-Arduino-Uno/?ALLSTEPS

Saygılar

Paylaşım için teşekkürler .