1 saniyelik timer ile beraberinde winproladder da 62 numaralı fonksiyonu kullanabilirsiniz..
Description :
● When conversion control "EN" = 1 or from 0 to 1( P instruction) , will convert the second data from the S~S+1 32-bit register into the equivalent hour : minute : second time value and store it in the three successive registers D~D+2. All the data in this instruction is represented in binary (if there is a negative value it is represented using the 2's complement.)
● After convert to hour : minute : second value, the minute : second value can only be in the range of -59 to 59, and the hour number can be in the range of -32768 to 32767 hours. Because of this, the maximum limit of D is -32768 hours, -59 minutes, -59 seconds to 32767 hours, 59 minutes, 59 seconds, the corresponding second value of S which is in the range of -117968399 to 117964799 seconds. If the S value exceeds this range, this instruction cannot be carried out, and will set the over range flag "OVR" to 1. If S = 0 then result is 0 flag "D = 0" will be set to 1.