halukmy
Üye
- Katılım
- 7 Şub 2022
- Mesajlar
- 23
- Puanları
- 1
- Yaş
- 68
DIM_PWM: Only use for PWM dimming signal in our device, generate a frequency is around 400Hz. Not relative to 0-10V analog signal.
DAC_PWM: Use for 0-10V analog signal output, work with a RC filter outside the RP2040.
DAC_FP: Use for detecting the 0-10V analog signal and adjust the 0-10V signal by a PID algorithm, to form a closed loop control
burada 400hz veri çıktığını gösteriyor, biz arduino ile digitalwrite veya analog write dışında nasıl bu pinleri kontrol ederiz?
DAC_PWM: Use for 0-10V analog signal output, work with a RC filter outside the RP2040.
DAC_FP: Use for detecting the 0-10V analog signal and adjust the 0-10V signal by a PID algorithm, to form a closed loop control
burada 400hz veri çıktığını gösteriyor, biz arduino ile digitalwrite veya analog write dışında nasıl bu pinleri kontrol ederiz?