#include <16F877A.h>
#device adc=8
#FUSES NOWDT //No Watch Dog Timer
#FUSES XT //Crystal osc <= 4mhz for PCM/PCH , 3mhz to 10 mhz for PCD
#FUSES NOPUT //No Power Up Timer
#FUSES NOPROTECT //Code not protected from reading
#FUSES NODEBUG //No Debug mode for ICD
#FUSES NOBROWNOUT //No brownout reset
#FUSES NOLVP //No low voltage prgming, B3(PIC16) or B5(PIC18) used for I/O
#FUSES NOCPD //No EE protection
#FUSES NOWRT //Program memory not write protected
#use delay(clock=4000000)
#use rs232 (baud=9600, xmit=PIN_C6, rcv=PIN_C7, stop=1, parity=N)
//#use rs232 (baud=9600, xmit=PIN_C6, rcv=PIN_C7, stop=1, parity=N,STREAM=seri1 )
//#use rs232(baud=9600, xmit=PIN_B2, rcv=PIN_B1, stream=PC)